Відео

20,000miles on easy use 10,000miles on heavy use

My question was never about speed, but rather the difference in volume of oil between a hot & old drain. My theory was a cold drain would yield more oil since all oil had time to drain into the sump from all parts of the engine. But since a hot drain yielded even more oil - and took less time - the theory is blown. Happy to be proven wrong on this. Thanks!!

No one buy from Simpson. These guys will scam you. “Simpson” I’m a customer for 6 years now. I hope you guys get sue to bankruptcy.

Great video of Static Pressure and running pressure, a drop from the Highest pressure when the trigger is released to the steady run pressure when using the pressure washer. We also refer to this "Static Pressure" as "Burst Pressure" , the first burst of pressure that occurs when you pull the trigger before the running pressure starts. Also, the size of the nozzle orifice will affect the running pressure. A larger 4.5-inch Nozzle will reduce the running pressure but allow more water to come through it.

I Did the oil change on my 2016 Honda pilot did what the guy from autozone told me buy 6 quarts of oil but I put all the 6 quarts of the oil I don’t think it’s bad for the engine since it has high mileage and we run the truck a lot or I messed up by putting all the 6 quarts ?

Do you do the flush on the old or new filter? I heard its worth placinf a new one and then do the flush. What”s your exp?

Everything you did was right, you are close to perfection but you should remove the crankcase or sump at the bottom after draining the old oil with liquid moli , to assist the secondary cleansing with the cheaper oil before you go for the final oil

What about putting the winners on there and then pressure washing to see which works best without agitation?

thank you

Adam's Bug Remover 🎤 ⬇️

Did you blow up everyone’s stock of turtle wax power foam or did they discontinue it?

Is it safe for engine?

Exelente producto!! Eh usado el de elevar octanaje y el otro para la aceleración ✌️👏👏👏

Waste of oil, test run wrong, incorrect parameters and results were and are inconclusive.

80 psi sheesh

He did all these oil changes back to back to back or he actually put miles on the oil ?

2400 PSI ouch! lets not oversimplify just use Citrol!

Just came here to see all the funnel comments

I really enjoy this video 📹.

I believe the oil get dark because of the 100km drive.... That is just my take on it

will they dye when left dry?

What's with most everyone wearing gloves on these videos? You're not going to catch anything from your mower. And why would you wash the mower then change the oil?

Liquy Molly best engine flush? xD Tec2000 ja best on market, and jest solutions is regular kerosine dach engine oil change. 500ml kerosine per 5000ml oil.

People are drawing the wrong convlusions from this video. The average person / shop waits a max of 15 minutes for oil to drain. In this case the amount drained is exactly the same. It's only if you wait significantly more than 15 minutes up to 12 hours (which nobody does) that the hot drains more than the cold.

👍👍🇪🇺🇪🇺

It gets darker after riding, if you do this test again, it’s better you go on a small 10km ride before each oil change

Now did it come out clearer next oil change ?

ua-cam.com/video/P0rfwHlkUz0/v-deo.htmlsi=y6GqiDJgh8fAECer this is LEADALLWAY platform truck 330lbs

can you do the same test with valvolines restore and protect?

Thanks for the demo and info, this is great. I was trying to find a solution to carry my ecoflow delta 2 max and extra battery around. Have a great day

How old was that first filter?!😮

Regular oil change is the best, engine flush is a killer for your engine, bearings especially and the rest of your components.

This is so fantastic. I need this for my car except I have an already at 2017. Do you know if they make it for the rdx ? Thanks

I have used Seafoam Bug Remover , it came out a few years ago ? Though after spraying and letting it dwell for a few minutes , I use a pressure washer at the self serve car wash . I think you might be scratching the paint , etc by wiping it away .

Since we give the car for service pickup, we couldn't be sure if they do Liqui Moily engine flush. Can we pour in thé same and then drive down to service centre for oil change? Will it cause any problem?

After spraying the bumper with water, I use a wet Costco dryer sheet to wipe the bugs off. Works pretty good and inexpensive too!!

good viDO, I wish U just drains the cold one after car had been sitting overnight(as it’s tricky to imp. to tell if whole eng. was at ambient 45•)👋

Try Valvoline Restore, or Restore And Protect.

Just did mine tonight following your video. My drain bolt was on the driver side though. When I got the bolt out, it shot out and I lost a bit of ATF to the floor but it was about 3qts of fluid that I had to replace. Fluid was dark and dirty, probably should’ve changed it at 50k.

So a larger filter would mean more time without oil on startup

Thank you so much for taking the time to make this video! It's very helpful!

Oil becomes that dark color when it's heated up. You can heat it up in a can or whatever and see it for yourself.

Hi Owen! I like your videos a lot! I really appreciate them, as they’re very informative and clear to follow the steps. I recently purchased a Skoda Octavia 2.0TDI with 120.000km from a friend and he told me he didn’t changed the oil for the last 80.000km 😮😢, and I believe him as the guy is crazy as fuck. I test drove the car and it runs great, and I got it for a very cheap price. I want to clean the engine properly, but knowing it has such an old oil on it, how would you proceed? 1. To put the Liqui Moly engine flush on the prehistoric oil and follow the instructions on your video? 2. To change that super dirty oil and put the LM engine flush in the second oil change and proceed as the rest of your video? Hope you understand me, my English is not very good. Thanks in advance!

Fram?

Must be a nasty engine. I change my oil and the oil comes out clean on the dipstick for quite awhile. In a Toyota 5.7 liter and a Cummins x15 engine.

To clear the sump out of the oil?

Tech tip: Flush your engine with cooking oil that way your mechanic can enjoy the delicious odor as he services your car

I will never do this to my Car Engine. Absolutly fine every 12000 km Oil change

Use Lubrizol 6178 additive. Very powerfull, you can instantly hear the difference!

I was able to steer a harbor freight long funnel into the fill hole.